Configuring Security using Device Manager 133Figure 30EAPOL MultiHosts screen -- Multi Host Session tab"EAPOL MultiHosts screen -- Multi Host Session tab" (page133) describes the fields on this tab.EAPOL MultiHosts screen -- Multi Host Session tabField DescriptionPortNumber The port number in use.ClientMACAddr The MAC address of the client.IdA unique identifier for the session, in theform of a printable ASCII string of at leastthree characters.AuthenticMethod The authentication method used toestablish the session.Time The elapsed time of the session.TerminateCause The cause of the session termination.UserName The username representing the identity ofthe supplicant PAE.—End—Non-EAPOL host support settingsFrom the EAPOL Advance tab on the Port screen, it is possible to viewnon-EAP host information and to configure the allowed non-EAP MACaddress list by clicking the Non-EAP MAC button on this tab.Managing the allowed non-EAP MAC address list To view and configurethe list of MAC addresses for non-EAPOL clients that are authorized toaccess the port, do the following:Step Action1 From the EAPOL Advance tab of the Port screen, click theNon-EAP MAC button. The Non-EAPOL MAC screen appearsNortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
