52 Configuring Security using the CLIThe no ssh command executed in the Global Configuration commandmode.There are no parameters or variables for the no ssh command.ssh secure commandThe ssh secure command enables the SSH server on the EthernetRouting Switch 2500 Series in secure mode. In secure mode, the EthernetRouting Switch 2500 Series does not accept Web, SNMP, or Telnetconnections. The syntax of the ssh secure command is:ssh secureThe ssh secure command executed in the Global Configuration commandmode.There are no parameters or variables for the ssh secure command.ssh timeout commandThe ssh timeout command sets the timeout value for sessionauthentication. The syntax of the ssh timeout command is:ssh timeout <1-120>The ssh timeout command executed in the Global Configurationcommand mode.Table 10 "ssh timeout command parameters and variables" (page52) describes the parameters and variables for the ssh timeoutcommand.Table 10ssh timeout command parameters and variablesParameters and variables Description<1-120> Specifies the timeout value for authentication. Thedefault is 60.ssh dsa-auth commandThe ssh dsa-auth command enables DSA authentication. The syntax ofthe ssh dsa-auth command is:ssh dsa-authThe ssh dsa-auth commandexecuted in the Global Configurationcommand mode.There are no parameters or variables for the ssh dsa-auth command.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
