40 Configuring Security using the CLIThe show ipmgr command is executed in the Privileged EXEC commandmode.The show ipmgr command has no parameters or variables.Figure 2 "show ipmgr command output" (page 40) displays sample outputfrom the show ipmgr command.Figure 2show ipmgr command outputipmgr command for management systemThe ipmgr command for the management systems enables the IP managerlist for Telnet, SNMP, or HTTP access. The syntax for the ipmgr commandfor the management systems is:ipmgr {telnet|snmp|web} [source-ip <1-10> [mask ]]The ipmgr command for the management systems is executed in theGlobal Configuration command mode.Table 3 "ipmgr command for system management parameters and variables"(page 40) describes the parameters and variables for the ipmgr command.Table 3ipmgr command for system management parameters and variablesParameters andvariables Descriptiontelnet|snmp|web Enables IP manager list checking for access tovarious management systems:• telnet— provides list access using TelnetaccessNortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.