Securing your system 73Table 31no snmp-server user command parameters and variablesParameters andvariables Descriptionengine-idSpecifies the SNMP engine ID of the remote SNMPentity. Specifies the user to be removed.snmp-server view commandThe snmp-server view command creates an SNMPv3 view. The viewis a set of MIB object instances that can be accessed. The syntax for thesnmp-server view command is:snmp-server view [ [[ [ [ [ [ [ []]]]]]]]]The snmp-server view command is executed in the Global Configurationcommand mode.T Table 32 "snmp-server view command parameters and variables" (page73)describes the parameters and variables for the snmp-server viewcommand.Table 32snmp-server view command parameters and variablesParameters andvariables Description Specifies the name of the new view; enter analphanumeric string. Specifies the Object identifier. OID can be entered asa MIB object English descriptor, a dotted form OID, ora mix of the two. Each OID can also be preceded by aplus (+) or minus (–) sign (if the minus sign is omitted, aplus sign is implied). For the dotted form, a subidentifiercan be an asterisk (*), which indicates a wildcard. Someexamples of valid OID parameters are as follows:Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
