Securing your network 93Parameters andvariables Descriptionsupplicant-timeout Specifies a waiting period for response from supplicantfor all EAP packets, except EAP Request/Identitypackets. Enter the number of seconds that you want towait; the range is 1-65535.server-timeoutSpecifies a waiting period for response from the server.Enter the number of seconds that you want to wait;the range is 1-65535.max-request Enter the number of times to retry sending packets tosupplicant.eapol guest-vlan commandThe eapol guest-vlan command sets the guest VLAN globally.The syntax for the eapol guest-vlan command is:eapol guest-vlan [vid <1-4094> | enable]The eapol guest-vlan command is executed in the Global Configurationcommand mode and Interface Configuration command mode.Table 50 "eapol guest-vlan command parameters and variables" (page93) describes the parameters and variables for the eapol guest-vlancommand.Table 50eapol guest-vlan command parameters and variablesParameters andvariables Description Guest VLAN ID.enable Enable Guest VLAN.no eapol guest-vlan commandThe no eapol guest-vlan command disables the guest VLAN.The syntax for the no eapol guest-vlan command is:no eapol guest-vlan [enable]The no eapol guest-vlan command is executed in the GlobalConfiguration command mode and Interface Configuration command mode.default eapol guest-vlan commandThe default eapol guest-vlan command disables the guest VLAN.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
