Securing your system 53no ssh dsa-auth commandThe no ssh dsa-auth command disables DSA authentication. Thesyntax for the no ssh dsa-auth command is:no ssh dsa-authThe no ssh dsa-auth command executed in the Global Configurationcommand mode.There are no parameters or variables for the no ssh dsa-auth command.ssh pass-auth commandThe ssh pass-auth command enables password authentication. Thesyntax of the ssh pass-auth command is:ssh pass-authThe ssh pass-auth command executed in the Global Configurationcommand mode.There are no parameters or variables for the ssh pass-auth command.no ssh pass-auth commandThe no ssh pass-auth command disables password authentication. Thesyntax of the no ssh pass-auth command is:no ssh pass-authThe no ssh pass-auth command executed in the Global Configurationcommand mode.There are no parameters or variables for the no ssh pass-authcommand.ssh port commandThe ssh port command sets the SSH connection port. The syntax ofthe ssh port command is:ssh port <1-65535>The ssh portcommand is executed in the Global Configuration commandmode.Table 11 "ssh port command parameters and variables" (page 54) describesthe parameters and variables for the ssh port command.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.