Securing your system 77snmp-server community commandWith the snmp-server community command, you can create communitystrings with varying levels of read, write, and notification access based onSNMPv3 views. These community strings are separate from those createdby using the snmp-server community command for read/write.This command affects community strings stored in the SNMPv3snmpCommunityTable, which allows several community strings to becreated. These community strings can have any MIB view.The syntax for the snmp-server community command is:snmp-server community {read-view |write-view |notify-view }The snmp-server community command is executed in the GlobalConfiguration command mode.Table 36 "snmp-server community command parameters and variables"(page 77) describes the parameters and variables for the snmp-servercommunity command.Table 36snmp-server community command parameters and variablesParameters andvariables Descriptionstring> Enter a community string to be created with access tothe specified views.ATTENTIONThis parameter is not available when PasswordSecurity is enabled, in which case, the switchprompts you to enter and confirm the newcommunity string.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
