64 Configuring Security using the CLIshow snmp-server community commandThe show snmp-server community command displays the SNMPcommunity string configuration. (The community strings are notdisplayed when Password Security is enabled.) The syntax for the showsnmp-server community command is:show snmp-server communityThe show snmp-server command is executed in the Privileged EXECcommand mode.snmp-server contact commandThe snmp-server contact command configures the SNMP sysContactvalue. The syntax for the snmp-server contact command is:snmp-server contact The snmp-server contact command is executed in the GlobalConfiguration command mode.Table 16 "snmp-server command parameters and variables" (page60) describes the parameters and variables for the snmp-servercontact command.Table 21snmp-server contact command parameters and variablesParameters and variables Description Specifies the SNMP sysContact value; enteran alphanumeric string.no snmp-server contact commandThe no snmp-server contact command clears the sysContact value.The syntax for the no snmp-server contact command is:no snmp-server contactThe no snmp-server contact command is executed in the GlobalConfiguration command mode.The no snmp-server contact command has no parameters or variables.default snmp-server contact commandThe default snmp-server contact command restores the sysContactvalue to the default value. The syntax for the default snmp-servercontact command is:default snmp-server contactNortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.