76 Configuring Security using the CLIParameters and variables Description Specifies the SNMPv3 username for trapdestination; enter an alphanumeric string.no snmp-server host for the new-style table commandThe no snmp-server for new-style table command deletes trap receiversfrom the new-style table (SNMPv3 MIB). Any trap receiver that matchesthe IP address and SNMP version is deleted. The syntax for the nosnmp-server host for new-style table command is:no snmp-server host {v1|v2c|v3}The no snmp-server host for the new-style table command is executedin the Global Configuration command mode.Table 35 "no snmp-server host for the new-style command parameters andvariables" (page 76) describes the parameters and variables for the nosnmp-server for the new-style table command.Table 35no snmp-server host for the new-style command parameters and variablesParameters andvariables Description Enter the IP address of a trap destination host.v1|v2c|v3 Specifies the trap receivers in the SNMPv3 MIBs.default snmp-server host commandThe default snmp-server host command restores the tableto defaults (that is, it clears the table). The syntax for the defaultsnmp-server host command is:default snmp-server hostThe default snmp-server host command is executed in the GlobalConfiguration command mode.The default snmp-server host command has no parameters orvariables.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
