154 Configuring Security using the CLIVACM dialog tab fieldsThe following table describes the Group Membership tab fields.Table 71Group Membership tab fieldsField DescriptionSecurityModel The security model for the entry.SecurityName The name of an entry in the USM table or theCommunity Table.GroupName The name of the group to which this entry belongs.When multiple entries in this table have the sameGroupName, they all belong to the same group.StorageType Specifies whether this table entry (row) will be storedin volatile or nonvolatile memory. If the entry is storedin volatile memory, it does not persist if the switchloses power.2 Click Insert.The VACM, Insert Group Membership dialog box appears.The following figure displays the VACM, Insert Group Membershipdialog box.3 Select a SecurityModel.4 Enter a SecurityName.5 Enter a GroupName.6 Click Insert.The VACM dialog box appears. The new group membership isshown in the list.—End—Assigning Group Access Rights with VACMTo assign new access rights to a group, use the following procedure:Step Action1 From the Device Manager menu bar, choose Edit > SnmpV3 >VACM table.The VACM dialog box appears (Figure 42 "VACM dialog, GroupMembership tab" (page 153)).Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.