Configuring SNMPv3 213• Click Yes to delete the target parameter configuration.• Click Cancel to return to the table without making changes.—End—Configuring an SNMP trap receiverYou can configure the IP address and community string for a new SNMPtrap receiver, view a table of existing SNMP trap receiver configurations, ordelete an existing SNMP trap receiver configuration(s).ATTENTIONThe SNMP Trap Receiver Table is an alternative to using the SNMPv3 TargetTable and SNMPv3 Parameter Table. However, only SNMPv1 traps areconfigurable using this table.Creating an SNMP trap receiver configurationTo create an SNMP trap receiver configuration, use the following procedure:Step Action1 From the main menu, choose Configuration > SNMP Trap.The SNMP Trap Receiver page appears.The following figure displays the SNMP Trap Receiver page.Figure 72SNMP Trap Receiver pageThe following table describes the fields on the Trap Receiver Tableand Trap Receiver Creation sections of the SNMP Trap Receiverpage.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
