162 Configuring Security using the CLICreating a Management Target AddressTo create an entry in the Management Target Address table, use thefollowing procedure:Step Action1 From the Device Manager menu bar, choose Edit > SnmpV3 >Target Table.The Target Table dialog box appears, with the Target Address Tabletab appears.The following figure displays the Target Table dialog box, targetAddress Table tab.Figure 49Target Table dialog box, Target Address Table tabTarget Address Table fieldsThe following table describes the Target Address Table fields.Table 76Target Address Table fieldsField DescriptionName Specifies the name for this target table entry.TDomain Specifies the domain of the management target. Thedefault is snmpUDPDomain.TAddress Specifies the IP address and destination UDP port forthis management target, for example, 10.0.4.27:162.Timeout Specifies the length of the time to wait in 1/100 thof a second, for an acknowledgement from thismanagement target before declaring the message astimed-out. The default is 1500 milliseconds.RetryCount Specifies the number of times this device canresend messages to this management target if initialmessages are not acknowledged. The default is 3.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.