Nortel 2526T Configuration

Also see for 2526T: Reference guide Quick install guide

Contents

96 Configuring Security using the CLIThe syntax for the no eapol multihost command is:no eapol multihost { [allow-non-eap-enable] [auto-non-eap-mhsa-enable] [radius-non-eap-enable] [use-radius-assigned-vlan][non-eap-pwd-fmt {[ip-addr] [mac-addr] [port-number]}]}"no eapol multihost parameters" (page 96) describes the parameters andvariables for theno eapol multihost command.no eapol multihost command parameters and variablesParameters and variables Descriptionallow-non-eap-enable Disables control of non-EAP clients(MAC addresses)auto-non-eap-mhsa-enable Disables auto-authentication ofnon-EAP clients in MHSA moderadius-non-eap-enable Disables Radius authentication ofnon-EAP clientsuse-radius-assigned-vlan Allows use of Radius-assigned VLANvaluenon-eap-pwd-fmt { [ip-addr][mac-addr] [portnumber] }Clears bits from RADIUS non-EAPOLpassword formatdefault eapol multihost command The default eapol multihostcommand sets the EAPoL multihost feature to default.This command is executed in the global configuration mode.The syntax for the default eapol multihost command is:default eapol multihost { [allow-non-eap-enable][auto-non-eap-mhsa-enable] [radius-non-eap-enable][use-radius-assigned-vlan] [non-eap-pwd-fmt {[ip-addr][mac-addr] [port-number]}] }"default eapol multihost parameters" (page 96) describes the parametersand variables for thedefault eapol multihost command.default eapol multihost command parameters and variablesParameters and variables Descriptionallow-non-eap-enable Resets control of non-EAP clients(MAC addresses)auto-non-eap-mhsa-enable Disables auto-authentication ofnon-EAP clients in MHSA moderadius-non-eap-enable Disables Radius authentication ofnon-EAP clientsNortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.