Configuring Security using Device Manager 163Field DescriptionTaglist Refers to zero or more Notify tags that are used to linkthis entry with entries in the Notify table. By default,you can enter either traporinform without having tocreate new entries in the Notification table.Params Specifies the entry in the Target Parameter tablewhich is associated with this Management TargetAddress.StorageType Specifies whether this table entry (row) will be storedin volatile or nonvolatile memory. If the entry is storedin volatile memory, it does not persist if the switchloses power.2 Click Insert.The Target Table, Insert Target Address Table dialog box appears.The following figure displays the Target Table, Insert Target AddressTable dialog box.Figure 50Target Table, Insert Target Address Table dialog box3 Enter a Name.4 Enter a TDomain name.5 Enter the IP address and UDP port number for this managementtarget, for example, 10.0.4.27:162.6 Accept or modify the default values in the TimeOut and RetryCountfields.7 In the Taglist field, enter the name of the tags (trap or inform),separated by a comma if more than one tag is entered. For moredetails, see Table 78 "Notify Table dialog box fields" (page 166).Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.