Configuring SNMPv3 207Item and MIBassociation Range DescriptionNotify Tag(snmpNotifyTag)1..32 Type a value to useto select entries in thesnmpTargetAddrTable. Any entryin the snmpTargetAddrTablewhich contains a tag value whichis equal to the value of an instanceof this object is selected. If thisobject carries a zero length, noentries are selectedNotify Type(snmpNotifyType)(1) Trap(2) InformChoose the type of notification togenerate.Entry Storage(snmpNotifyStorageType)(1) Volatile(2) Non-VolatileChoose your storage preference.Selecting Volatile requestsinformation to be dropped (lost)when you turn off the power.Selecting Non-Volatile requestsinformation to be saved in NVRAMwhen you turn off the power.2 In the Notification Creation section, type the required informationin the text boxes or select from a list.3 Click Submit.The new entry is displayed in the Notification Table "Notificationpage" (page 206) .—End—ATTENTIONThis Notification Table section of the Notification page contains hyperlinks tothe Target Parameter page.Deleting an SNMPv3 system notification configurationTo delete an SNMPv3 notification configuration, use the following procedure:Step Action1 From the main menu, choose Configuration > SNMPv3 >Notification.The Notification page appears ("Notification page" (page 206)).Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
