66 Configuring Security using the CLIdefault snmp-server location commandThe default snmp-server location command restores sysLocationto the default value. The syntax for the default snmp-serverlocation command is:default snmp-server locationThe default snmp-server location command is executed in theGlobal Configuration command mode.The default snmp-server location command has no parametersor variables.snmp-server name commandThe snmp-server name command configures the SNMP sysName value.The syntax for the snmp-server name command is:snmp-server name The snmp-server name command is executed in the Global Configurationcommand mode.Table 24 "snmp-server name command parameters and variables" (page66) describes the parameters and variables for the snmp-server namecommand.Table 24snmp-server name command parameters and variablesParameters andvariables Description Specifies the SNMP sysName value; enter analphanumeric string of up to 255 characters.no snmp-server name commandThe no snmp-server name command clears the SNMP sysName value.The syntax for the no snmp-server name command is:no snmp-server name The no snmp-server name command is executed in the GlobalConfiguration command mode.Table 25 "no snmp-server name command parameters and variables" (page67) describes the parameters and variables for the no snmp-servername command.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.