Securing your system 65The default snmp-server contact command is executed in theGlobal Configuration command mode.The default snmp-server contact command has no parametersor variables.snmp-server location commandThe snmp-server location command configures the SNMPsysLocation value. The syntax for the snmp-server location commandis:snmp-server location The snmp-server location command is executed in the GlobalConfiguration command mode.Table 22 "snmp-server location command parameters and variables"(page 65) describes the parameters and variables for the snmp-serverlocation command command.Table 22snmp-server location command parameters and variablesParameters andvariables Description Specifies the SNMP sysLocation value; enter analphanumeric string of up to 255 characters.no snmp-server location commandThe no snmp-server location command clears the SNMP sysLocationvalue. The syntax for the no snmp-server location command is:no snmp-server location The no snmp-server location command is executed in the GlobalConfiguration command mode.Table 23 "no snmp-server location command parameters and variables"(page 65) describes the parameters and variables for the no snmp-serverlocation command.Table 23no snmp-server location command parameters and variablesParameters andvariables Description Specifies the SNMP sysLocation value. Enter a string ofup to 255 characters.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
