60 Configuring Security using the CLITable 16snmp-server command parameters and variablesParameters and variables Descriptionenable|disable Enables or disables the SNMP server.no snmp-server commandThe no snmp-server command disables SNMP access. The syntax forthe no snmp-server command is:no snmp-serverThe no snmp-server command is executed in the Global Configurationcommand mode.The no snmp-server command has no parameters or variables.ATTENTIONDisabling SNMP access also locks you out of the Device Manager managementsystem.snmp-server authentication-trap commandThe snmp-server authentication-trap command enables ordisables the generation of SNMP authentication failure traps. The syntax forthe snmp-server authentication-trap command is:snmp-server authentication-trap {enable|disable}The snmp-server authentication-trap command is executed in theGlobal Configuration command mode.Table 17 "snmp-server authentication-trap command parameters andvariables" (page 60) describes the parameters and variables for thesnmp-server authentication-trap command.Table 17snmp-server authentication-trap command parameters and variablesParameters andvariables Descriptionenable|disable Enables or disables the generation of authenticationfailure traps.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
