Nortel 2526T Configuration

Also see for 2526T: Reference guide Quick install guide

Contents

Securing your network 89Parameters andvariables DescriptionAdmin Dir Specifies whether EAPOL authentication is set for incoming and outgoingtraffic (Both) or for incoming traffic only (In).For example, if you set the specified port field value to both, and EAPOLauthentication fails, then both incoming and outgoing traffic on thespecified port is blocked.Oper Dir Specifies the current operational value for the traffic control directionfor the port.Re-authentication Enables or disables re-authenticationRe-authentication Period Specifies the time interval between successive re-authentications;the range is <1-604800>Quite Period Specifies the time interval between authentication failure and start of newauthentication; the range is <0-65535>Transmit Period Specifies a waiting period for response from supplicant for EAP Requestor Identity packets; the range is <1-65535>Supplicant Timeout Specifies a waiting period for response from supplicant for all EAPpackets;the range is <1-65535>Server Timeout Specifies the time to wait for response from RADIUS server;the range is <1-65535>Max Request Specifies the number of times to retry sending packets to supplicant;the range is <1-10>show eapol auth-diags interface commandThe show eapol auth-diags interface command displays EAPOLdiags.The syntax for the show eapol auth-diags interfacecommand is:show eapol auth-diags interfaceThe show eapol auth-diags interface command is executed in thePrivileged EXEC command mode.Figure 12 "show eapol auth-diags interface command output" (page90) displays sample output from the show eapol auth-diagsinterface command.Nortel Ethernet Routing Switch 2500 SeriesSecurity — Configuration and ManagementNN47215-505 (323165-B) 02.01 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.