Panasonic PT-FZ570 Operating Instructions Manual

Also see for PT-FW530: Operating instructions (functional manual)Operating instructions

Contents

Panasonic PT-FZ570 Operating Instructions Manual Manual pdf 101 page image

Chapter 4 Settings — [NETWORK] menuENGLISH - 101[NETWORK] menuOn the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen.Notef The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (ModelNo.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by accessing the projector via acomputer. For detailed, please refer to "Web control function" → "[Network config] page" → "Wireless LAN" (x page 119).[DIGITAL LINK MODE]Switch the communication method of the terminal of the projector.1) Press as to select [DIGITAL LINK MODE].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Switches the communication method automatically to DIGITAL LINK, long reach or Ethernet.[DIGITAL LINK] Fixes the communication method to DIGITAL LINK.[LONG REACH] Fixes the communication method to long reach.[ETHERNET] Fixes the communication method to Ethernet.Possible communication modesl: Communication possible―: Communication not possibleSettingCommunication possibleImage transmission(100 m (328'1"))Image transmission(150 m (492'2")) Ethernet RS-232C[AUTO]For DIGITAL LINK l ― l lFor long reach ― l l lFor Ethernet ― ― l ―[DIGITAL LINK] l ― l l[LONG REACH] ― l l l[ETHERNET] ― ― l ―Notef The maximum transmission distance when connected with the long-reach communication method is 150 m (492'2"). However, the signalthat the projector can receive is only up to 1080/60p (1 920 x 1 080 dots, dot clock frequency:148.5 MHz).f When the communication method of the twist-pair-cable transmitter is set to long reach, it will connect with long-reach communicationmethod when [DIGITAL LINK MODE] is set to [AUTO]. To connect with the optional DIGITAL LINK Switcher (Model No.: ET-YFB200G) withthe long-reach communication method, set [DIGITAL LINK MODE] to [LONG REACH].f It will not connect correctly if the twist-pair-cable transmitter is not supporting the long-reach communication method even if [DIGITAL LINKMODE] is set to [LONG REACH].[DIGITAL LINK STATUS]Display DIGITAL LINK connection environment.1) Press as to select [DIGITAL LINK STATUS].2) Press the button.f The [DIGITAL LINK STATUS] screen is displayed.[LINK STATUS] Either [NO LINK], [DIGITAL LINK], [LONG REACH] or [ETHERNET] is displayed.[HDCP STATUS] Either [NO SIGNAL], [OFF], or [ON] is displayed.