Chapter 4 Settings — [DISPLAY OPTION] menu78 - ENGLISHSetting [COMPUTER1 EDID MODE]/[COMPUTER2 EDID MODE]1) Press as to select [COMPUTER IN/OUT].2) Press the button.f The [COMPUTER IN/OUT] screen is displayed.3) Press as to select [COMPUTER1 EDID MODE] or [COMPUTER2 EDID MODE].4) Press the button.f The [COMPUTER1 EDID MODE] or the [COMPUTER2 EDID MODE] screen is displayed.5) Press qw to switch [EDID MODE].f The items will switch each time you press the button.[DEFAULT] Standard setting.[SCREEN FIT] Changes EDID data according to the [SCREEN FORMAT] setting.[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.f When [DEFAULT] or [SCREEN FIT] is selected, proceed to Step 10).6) Press the button.f The [RESOLUTION] screen is displayed.7) Press as to select [RESOLUTION].f Select [1024x768p], [1280x720p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p],[1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i] or [1920x1200p].8) Press the button.f The [VERTICAL SCAN FREQUENCY] screen is displayed.9) Press qw to select [VERTICAL SCAN FREQUENCY].f Select [60Hz], [50Hz], [30Hz], [25Hz] or [24Hz] when [1920x1080p] is selected for [RESOLUTION].f Select [60Hz], [50Hz] or [48Hz] when [1920x1080i] is selected for [RESOLUTION].f The value is fixed to [60Hz] when [1280x1024p], [1400x1050p], [1440x900p] or [1600x1200p] is selectedfor [RESOLUTION].f Select [60Hz] or [50Hz] when anything other than the above signals are selected for [RESOLUTION].10) Press the button.f The confirmation screen is displayed.11) Press qw to select [OK], and press the button.Notef The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] below [EDID MODE].f The resolution and vertical scanning frequency settings may be required on your computer or video device.f After configuring settings, your computer or video device or the projector may be required to be restarted.f Output with resolution and vertical scanning frequency that have been set may not be performed depending on your computer or videodevice.f When the image is displayed incorrectly even if the format is selected in [EDID MODE], please check the settings of [WIDE MODE](x page 84) or [SXGA MODE] (x page 84).[HDMI IN]Switch the setting when the external device is connected to the terminal or the terminalof the projector and the image is not projected correctly.1) Press as to select [HDMI IN].2) Press the button.f The [HDMI IN] screen is displayed.3) Press as to select [SIGNAL LEVEL].4) Press qw to switch the item.f The items will switch each time you press the button.
