Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 771) Press as to select [ON-SCREEN DISPLAY].2) Press the button.f The [ON-SCREEN DISPLAY] screen is displayed.3) Press as to select [WARNING MESSAGE].4) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Hides the warning message.[ON] Displays the warning message.Notef When [WARNING MESSAGE] is set to [OFF], the warning message will not be displayed on the projected image even if a warning statussuch as lamp replacement, temperature warning or air filter replacement is detected.[COMPUTER IN/OUT]Set to match the signal to input to the terminal and the terminal.Setting [COMPUTER1 INPUT SETTING]Switches the input for the terminal.1) Press as to select [COMPUTER IN/OUT].2) Press the button.f The [COMPUTER IN/OUT] screen is displayed.3) Press as to select [COMPUTER1 INPUT SETTING].4) Press qw to switch the item.f The items will switch each time you press the button.[RGB/YPBPR ] Select when you want to input the RGB signal or YPB PR (YCBC R) signal to the terminal.[Y/C] Select when you want to input a luminance signal and a color signal to the terminal by using the optional D-SUB - S Video conversion cable (Model No.:ET-ADSV).Notef When Y/C signals are input to the terminal, please use the optional D-SUB - S Video conversion cable (Model No.:ET-ADSV). Refer to “Connecting example: AV equipment” (x page 37) for connecting method.[COMPUTER2 SELECT]Set whether to use the terminal.1) Press as to select [COMPUTER IN/OUT].2) Press the button.f The [COMPUTER IN/OUT] screen is displayed.3) Press as to select [COMPUTER2 SELECT].4) Press qw to switch the item.f The items will switch each time you press the button.[COMPUTER2 IN] Select when you want to input the RGB signal or YPBPR (YCBC R) signal to terminal.[COMPUTER1 OUT] Select when you want to output the RGB signal or the YPBPR/(YCBC R) signal to terminal.Notef If [COMPUTER2] is selected to be input, [COMPUTER2 SELECT] cannot be selected.
