Chapter 1 Preparation — About your projector26 - ENGLISHAttentionf Do not drop the remote control.f Avoid contact with liquids or moisture.f Do not attempt to modify or disassemble the remote control.f Please observe the following contents that are described on the back of the remotecontrol unit (see the right picture).1. Do not use a new battery together with an old battery.2. Do not use unspecified batteries.3. Make sure the polarities (+ and -) are correct when inserting the batteries.f In addition, please read the contents that are related to batteries in the "Read this first!".Caution label at the back of the remote controlNotef When operating the remote control by directly pointing the remote control signal receiver of the projector, operate the remote control ata distance approx. 30 m (98'5") or shorter from the remote control signal receiver. The remote control can control at angles of up to ±30°vertically and horizontally, but the effective control range may be reduced.f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.f The signal will be reflected off the screen. However, the operating range may be limited from light reflection loss due to the screen material.f If the remote control signal receiver directly receives strong light, such as fluorescent light, the remote control may not operate properly. Useit in a place distant from the light source.f The power indicator will blink if the projector receives a remote control signal.Projector body1 762 3 4 58 9 10 811 13 14 16151917 111812WARNINGKeep your hands and other objects away from the airexhaust port.f Keep your hands and face away.f Do not insert your fingers.f Keep heat-sensitive objects away.Heated air from the air exhaust port can cause burns, injury, ordeformations.1 Remote control signal receiver (front)2 Power indicator Displays the status of the power.3 Lamp indicator Displays the status of the lamp.4 Temperature indicator Displays the status of the internal temperature.5 Filter indicator Displays the status of the air filter unit.6 Focus lever (Front)Zoom lever (Back)7 Lens shift leverAdjusts the projection position.8 Adjustable feetAdjusts the projection angle.9 Speaker10 Projection lens11 Air exhaust port12 Remote control signal receiver (rear)1. 请勿把旧电池和新电池一起使用。2. 请勿使用不合规格的电池。3. 确保电池安装正确。原产地:中国1.Do not use old battery with new one.2.Do not use batteries other than thetype specified.3.Be sure the batteries are inserted properly.Made in ChinaFront SideRearProjection direction