Chapter 4 Settings — Menu navigation58 - ENGLISHNotef Pressing the the button.f Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot be adjusted orused are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME LOCK] may not be displayeddepending on the input signal.f Some items can be adjusted even if signals are not input.f Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.f For menu items, refer to “Main menu” (Æ page 58) and “Sub menu” (Æ page 58).Resetting adjustment values to the factory defaultIf the button on the remote control is pressed, the values adjusted in the menu items are restored tothe factory default settings.button1) Press the button on the remote control.Notef You cannot reset all the settings to the factory default at a time.f To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP] menu → [INITIALIZEALL]. (Æ page 97)f Some items cannot be reset by pressing the button. Adjust each item manually.Main menuThe following items are in the main menu.When a main menu item is selected, the screen changes to a sub-menu selection screen.Main menu item Page[PICTURE] 61[POSITION] 66[LANGUAGE] 75[DISPLAY OPTION] 76[PROJECTOR SETUP] 87[SECURITY] 98[NETWORK] 101Sub-menuThe sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
