Chapter 3 Basic Operations — Operating with the remote control54 - ENGLISHUsing the FUNCTION buttonSome operations in the menu can be assigned to the button on the remote control so that it can beused as an easy shortcut button.button1) Press the button.To assign functions to the button1) Press the menu, sub menu, or details menu) you want to assign.f Refer to “Navigating through the menu” (x page 57) for the operation of the on-screen menu.2) Press and hold the button for three seconds or more.Notef After settings have been completed, the assigned menu item (main menu, sub-menu, or details menu) will be displayed in [ASSIGNEDFUNCTION] of the operation guide under the menu.f Assignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 91) when deallocatingfunctions.Displaying internal test patternsThe projector has ten types of internal test patterns to check the condition of the projector. To display test patterns,perform the following steps.button1) Press the button.2) Press qw to select the test pattern.Notef Setting is also available from the [TEST PATTERN] (x page 93) menu.f Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performingvarious adjustments.Using the status functionYou can display the status of the projector.button1) Press the button.f The [STATUS] screen is displayed.
