Chapter 4 Settings — [PICTURE] menuENGLISH - 61[PICTURE] menuOn the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen.[PICTURE MODE]You can switch to the desired picture mode suitable for the image source and the environment in which theprojector is used.1) Press as to select [PICTURE MODE].2) Press qw or the button.f The [PICTURE MODE] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[STANDARD] The image becomes suitable for moving images in general.[DYNAMIC] The light output is maximized for use in bright areas.[DICOM SIM.] The image becomes similar to that of DICOM Part 14 Grayscale Standard.[BLACKBOARD] The image becomes suitable for projecting on a blackboard.[WHITE BOARD] The image becomes suitable for projecting on a white board.[CINEMA]*1 The image becomes suitable for movie contents.[NATURAL] *2 The image becomes suitable for using in low-light areas.*1 Only for movie-based input signals*2 Only for still image input signalsNotef DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although theDICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.f When [PICTURE MODE] is set to [DICOM SIM.], the [DAYLIGHT VIEW] is fixed to [OFF].f When [PICTURE MODE] is set to [DICOM SIM.], the [LAMP POWER] in the [PROJECTOR SETUP] menu is fixed to [ECO].[CONTRAST]You can adjust the contrast of the colors.1) Press as to select [CONTRAST].2) Press qw or the button.f The [CONTRAST] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress the w button. Brightens the screen and makes the color of image deeper. - 32 ~ +32Press the q button. Darkens the screen and makes the color of image lighter.Attentionf Adjust [BRIGHTNESS] first when you need to adjust [BRIGHTNESS] and [CONTRAST].[BRIGHTNESS]You can adjust the dark (black) part of the projected image.1) Press as to select [BRIGHTNESS].2) Press qw or the button.f The [BRIGHTNESS] individual adjustment screen is displayed.3) Press qw to adjust the level.
