Chapter 4 Settings — [DISPLAY OPTION] menu84 - ENGLISHf The items will switch each time you press the button.[BLUE] Displays the entire projection area in blue.[BLACK] Displays the entire projection area in black.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.Notef To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.[WIDE MODE]Using this function when the image is displayed incorrectly for the input signals.1) Press as to select [WIDE MODE].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Displays by judging the signal automatically. Set to this mode normally.[ON] When input the wide signal.[OFF] When input the 4:3 signal.[SXGA MODE]This function is used if the whole projected image is not displayed when the resolution 1 280 x 1 024 dots of theSXGA signal is input.1) Press as to select [SXGA MODE].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Displays by judging the signal automatically. Set to this mode normally.[1280x1024] Switches the item to [1280x1024] or [1400x1050] manually if the whole projected image is not displayed whenSXGA signal is input.[1400x1050][P-TIMER]Set and operate the presentation timer function.Setting the mode1) Press as to select [P-TIMER].2) Press the button.f The [P-TIMER] screen is displayed.3) Press as to select [MODE].4) Press qw to switch the item.f The items will switch each time you press the button.[COUNT UP] Displays the elapsed time since the count was started.[COUNT DOWN] Displays the remaining time of the time set by [TIMER].Setting the countdown timer1) Press as to select [P-TIMER].2) Press the button.f The [P-TIMER] screen is displayed.3) Press as to select [TIMER].
