Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 8111) Press qw to select [OK], and press the button.Notef The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] below [EDID MODE].f The resolution and vertical scanning frequency settings may be required on your computer or video device.f After configuring settings, your computer or video device or the projector may be required to be restarted.f Output with resolution and vertical scanning frequency that have been set may not be performed depending on your computer or videodevice.[CLOSED CAPTION SETTING] (Only for NTSC, 480i YC B C R input)Set the closed caption.Selecting the closed caption display1) Press as to select [CLOSED CAPTION SETTING].2) Press the button.f The [CLOSED CAPTION SETTING] screen is displayed.3) Press as to select [CLOSED CAPTION].4) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Closed captions are not displayed.[ON] Closed captions are displayed.f When [ON] is selected, proceed to Step 5).5) When the confirmation screen is displayed, press qw to select [OK], and press the button.Setting the closed caption mode1) Press as to select [CLOSED CAPTION SETTING].2) Press the button.f The [CLOSED CAPTION SETTING] screen is displayed.3) Press as to select [MODE].f When [CLOSED CAPTION] is set to [OFF], [MODE] cannot be selected.4) Press qw to switch the item.f The items will switch each time you press the button.[CC1] Displays CC1 data.[CC2] Displays CC2 data.[CC3] Displays CC3 data.[CC4] Displays CC4 data.Notef Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayeddepending on the connected devices or contents being played back.f [CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YCBC R signal is input.f If [CLOSED CAPTION] is set to [ON], the brightness of image may be changed according to the external devices or the used content of theclosed caption corresponding connection.f If a closed caption signal of the selected mode is input, the security message set in the [SECURITY] menu → [DISPLAY SETTING] (Æ page98) is not displayed.f Closed captions are not displayed when the menu screen is displayed.[SCREEN SETTING]Set the screen size.Correct to the optimum image position for the set screen when changing the aspect ratio of a projected image. Setas necessary for the screen in use.1) Press as to select [SCREEN SETTING].
