Chapter 4 Settings — [POSITION] menuENGLISH - 73Attentionf Set it before adjusting [CLOCK PHASE].Notef Depending on the input signal, if the adjustment of [DOT CLOCK] exceeds the effective adjustment range of the input signal, the position ofthe image cannot be changed. Please adjust [DOT CLOCK] within an effective adjustment range.[CLOCK PHASE](Only for RGB signals and YCBC R/YPBPR signals input)You can adjust to achieve an optimal image when there is a flickering image or smeared outlines.1) Press as to select [CLOCK PHASE].2) Press qw or the button.f The [CLOCK PHASE] individual adjustment screen is displayed.3) Press qw to adjust.f Adjustment value will change between [-16] and [+16]. Adjust so that the amount of interference is at aminimum.Notef Certain signals may not be adjustable.f Optimal value may not be achieved if the output from the input computer is unstable.f To project a signal with dot clock frequency with 162 MHz or higher, noise may not disappear even if [CLOCK PHASE] is adjusted.f [CLOCK PHASE] cannot be adjusted when a digital signal is input.[OVER SCAN](Only for movie-based RGB signals, YCBC R/YPBPR signals, movie-based HDMI signals, movie-based DIGITALLINK signals, VIDEO signals and Y/C signals input)Use this function when characters or pictures are cropped near the periphery of the projected image.1) Press as to select [OVER SCAN].2) Press qw or the button.f The [OVER SCAN] individual adjustment screen is displayed.3) Press qw to adjust the level.f The adjustment values are [0] to [+3].[ASPECT]You can switch the aspect ratio of the image.The aspect ratio is switched within the screen range selected in [SCREEN FORMAT] of [DISPLAY OPTION] menu→ [SCREEN SETTING]. Set [SCREEN FORMAT] first. (x page 81)1) Press as to select [ASPECT].2) Press qw or the button.f The [ASPECT] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[NORMAL] Displays images without changing the aspect ratio of the input signals.[AUTO] * 1 The aspect ratio is automatically switched to the optimum aspect ratio when an aspect ratio identifier isincluded in the input signal.[WIDE] Displays images with the aspect ratio converted to 16:9 when standard signals* 2 are input.Display images without changing the aspect ratio when wide-screen signals * 3 are input.[H FIT]Displays images using the entire width of the screen. When signals have the aspect ratio vertically longer thanthe aspect ratio of the screen selected in [SCREEN FORMAT], the images are displayed with the top and thebottom parts cut off.
