Panasonic PT-FZ570 Operating Instructions Manual

Also see for PT-FW530: Operating instructions (functional manual)Operating instructions

Contents

Panasonic PT-FZ570 Operating Instructions Manual Manual pdf 36 page image

Chapter 2 Getting Started — Connecting36 - ENGLISHConnectingBefore connectingf Before connecting, carefully read the operating instructions for the external device to be connected.f Turn off the power of all devices before connecting cables.f Take note of the following points before connecting the cables. Failure to do so may result in malfunctions.g When connecting a cable to a device connected to the projector or the projector itself, touch any nearbymetallic objects to eliminate static electricity from your body before performing work.g Do not use unnecessarily long cables to connect a device to the projector or to the projector body. The longerthe cable, the more susceptible to noise it becomes. Since using a cable while it is wound makes it act like anantenna, it is more susceptible to noise.g When connecting cables, connect GND first, then insert the connecting terminal of the connecting device in astraight manner.f Acquire any connection cable necessary to connect the external device to the system that is neither suppliedwith the device nor available as an option.f If video signals from video equipment contain too much jitter, the images on the screen may wobble. In thiscase, a time base corrector (TBC) must be connected.f The projector accepts video signals, Y/C signals, YCBC R/YPBPR signals, analog RGB signals (synchronizationsignals are TTL level), and digital signals.f Some computer models or graphics cards are not compatible with the projector.f Use a cable compensator when you connect devices to the projector using long cables. Otherwise the imagemay not display properly.f Refer to “List of compatible signals” (x page 149) for the types of video signals that can be used with theprojector. terminal pin assignments and signal namesOutside view Pin No. Signal name Pin No. Signal name(10)(6)(11) (15)(1) (5)(1) R/P R /C (9) +5 V(2) G/Y/Y (10) GND(3) B/PB (11) GND(4) ― (12) DDC data(5) GND (13) HD/SYNC(6) GND (14) VD(7) GND (15) DDC clock(8) GND terminal pin assignments and signal namesOutside view Pin No. Signal name Pin No. Signal name(10)(6)(11) (15)(1) (5)(1) R/P R (9) +5 V(2) G/Y (10) GND(3) B/P B (11) GND(4) ― (12) DDC data(5) GND (13) HD/SYNC(6) GND (14) VD(7) GND (15) DDC clock(8) GND