Chapter 2 Getting Started — ConnectingENGLISH - 37 terminal/ terminal pin assignments and signal namesOutside view Pin No. Signal name Pin No. Signal nameEven-numbered pins of (2) to (18)(1) (19)(2) (18)Odd-numbered pins of (1) to (19)(1) T.M.D.S data 2+ (11) T.M.D.S clock shield(2) T.M.D.S data 2 shield (12) T.M.D.S clock-(3) T.M.D.S data 2- (13) CEC(4) T.M.D.S data 1+ (14) —(5) T.M.D.S data 1 shield (15) SCL(6) T.M.D.S data 1- (16) SDA(7) T.M.D.S data 0+ (17) DDC/CECGND(8) T.M.D.S data 0 shield (18) +5 V(9) T.M.D.S data 0- (19) Hot plug detection(10) T.M.D.S clock+Connecting example: AV equipmentVideo deck (TBC built-in)Video deck (TBC built-in) Blu-ray disc player Audio equipmentAttentionf Always use one of the following when connecting a VCR.g A VCR with built-in time base corrector (TBC)g A time base corrector (TBC) between the projector and the VCRf If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector (TBC) between theprojector and the external devices.Notef For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standardsis used, images may be interrupted or may not be displayed.f The terminal/ terminal of the projector can be connected to an external device with a DVI-D terminal by using anHDMI/DVI conversion cable, but some devices may not project the image properly or function properly.f The projector does not support VIERA Link (HDMI).f If the [AUDIO IN SELECT] settings are incorrect, the projector may have malfunctions such as the absence of audio.f When Y/C signals are input to the terminal, switch the setting by using the [DISPLAY OPTION] menu → [COMPUTERIN/OUT] → [COMPUTER1 INPUT SETTING]. (x page 77) In addition, When Y/C signals are input, please use the optional D-SUB - SVideo conversion cable (Model No.:ET-ADSV).S-videocableD-SUB - S Videoconversion cable
