Chapter 4 Settings — [DISPLAY OPTION] menu82 - ENGLISH2) Press the button.f The [SCREEN SETTING] screen is displayed.3) Press as to select [SCREEN FORMAT].4) Press qw to switch the [SCREEN FORMAT] item.f The items will switch each time you press the button.r For PT-FZ570[SCREEN FORMAT] Description Range when [SCREEN POSITION] is selected[16:10] The projected aspect ratio is 16:10. The vertical position cannot be adjusted.[16:9] The projected aspect ratio is 16:9. Adjusts the vertical position.[4:3] The projected aspect ratio is 4:3. Adjusts the horizontal position.r For PT-FW530[SCREEN FORMAT] Description Range when [SCREEN POSITION] is selected[16:10] The projected aspect ratio is 16:10. The vertical position cannot be adjusted.[16:9] The projected aspect ratio is 16:9. Adjusts the vertical position.r For PT-FX500[SCREEN FORMAT] Description Range when [SCREEN POSITION] is selected[4:3] The projected aspect ratio is 4:3 The vertical position cannot be adjusted.[16:9] The projected aspect ratio is 16:9. Adjusts the vertical position.5) Press as to select [SCREEN POSITION].f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to the followingitem.PT-FZ570 and PT-FW530: [16:10]PT-FX500: [4:3]6) Press qw to adjust the [SCREEN POSITION].f The items will switch each time you press the button.r When [SCREEN FORMAT] is [16:9][CENTER] The image which aspect ratio is 16:9 will displayed in the center.[HIGH] The image which aspect ratio is 16:9 will displayed at the top.[LOW] The image which aspect ratio is 16:9 will displayed at the bottom.r When [SCREEN FORMAT] is [4:3](Only for PT-FZ570)[CENTER] The image which aspect ratio is 4:3 will displayed at the center.[LEFT] The image which aspect ratio is 4:3 will displayed in the left.[RIGHT] The image which aspect ratio is 4:3 will displayed at the right.[STARTUP LOGO]Set the logo display when the power is turned on.1) Press as to select [STARTUP LOGO].2) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.[OFF] Disables the startup logo display.Notef The startup logo will disappear in approximately 30 seconds.f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
