Panasonic PT-FZ570 Operating Instructions Manual

Also see for PT-FW530: Operating instructions (functional manual)Operating instructions

Contents

Panasonic PT-FZ570 Operating Instructions Manual Manual pdf 94 page image

Chapter 4 Settings — [PROJECTOR SETUP] menu94 - ENGLISHAll whiteSelect a test pattern so that it is easy to make various adjustments.Color bars (vertical)Color bars (horizontal)16 gradations (vertical 1)16 gradations (vertical 2)16 gradations (horizontal 1)16 gradations (horizontal 2)White cross on the blackbackgroundBlack cross on the whitebackgroundCross hatchNotef The initial setting is All white. The initial screen is Cross hatch if you have assigned it to the button.f Press the button on the remote control while the test pattern is displayed to hide the menu screen.[FILTER COUNTER]You can check the filter usage time and set the cleaning cycle for the air filter. Also, reset the filter usage time.1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.[FILTER COUNTER] Displays the using time of the filter.[TIMER] Sets the cleaning cycle (time) for the air filter.[FILTER COUNTER RESET] Resets the filter usage time.Setting [TIMER]Sets the cleaning cycle (time) if you want to clean the air filter periodically. When the time reaches, an alertmessage “FILTER COUNTER has reached the set time.” for filter cleaning is displayed on the projected screen.1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.3) Press as to select [TIMER].4) Press qw to switch the setting of the timer.f The items will switch each time you press the button.[OFF] Sets when you do not want to display the set time reaching alert message.[1000 H] ~ [16000 H] Sets the timer in 1 000 hour increments from 1 000 to 16 000 hours.Resetting [FILTER COUNTER]1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.3) Press as to select [FILTER COUNTER RESET].4) Press the button.f The [FILTER COUNTER RESET] screen is displayed.5) Press qw to select [OK] and then press the button.[SCHEDULE]Set the command execution schedule for each day of the week.