|
Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 83[AUTO SETUP SETTING]Set the automatic execution of AUTO SETUP.The screen display position or signal level can be adjusted automatically without pressing the button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.1) Press as to select [AUTO SETUP SETTING].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Enables the auto setup function when switching signals.[BUTTON] Enables the auto setup function only when the button is pressed.[SIGNAL SEARCH]When the power is turned on, this function automatically detects the terminal which signals are input and sets thefunction to switch.1) Press as to select [SIGNAL SEARCH].2) Press qw to switch the item.f The items will switch each time you press the button.[ON] Enables input detection automatically.[OFF] Disables input detection automatically.Notef If the [SIGNAL SEARCH] is set to [ON] when there is no signal input, press the button, this function automatically detectsthe terminal to which signals are input and then switches.[STARTUP INPUT SELECT]Set the input when the projector is switched on to start projection.1) Press as to select [STARTUP INPUT SELECT].2) Press the button.f The [STARTUP INPUT SELECT] screen is displayed.3) Press as to select an item.f The items will switch each time you press the button.[LAST USED] Keeps the input selected last.[NETWORK] Sets the input to NETWORK.[COMPUTER1] Sets the input to COMPUTER1.[COMPUTER2] Sets the input to COMPUTER2.[HDMI1] Sets the input to HDMI1.[HDMI2] Sets the input to HDMI2.[VIDEO] Sets the input to VIDEO.[DIGITAL LINK] Sets the input to DIGITAL LINK.[INPUT1] -[INPUT10] *1Sets the input to DIGITAL LINK, and switches the input of Panasonic twisted-pair-cable transmitter to thespecified input.*1 When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its input name isautomatically reflected from [INPUT1] to [INPUT10]. If an item where the input name is not reflected is selected, it is disabled.Notef When [SIGNAL SEARCH] is set to [ON], the [STARTUP INPUT SELECT] cannot be set.[BACK COLOR]Set the display of the projected screen when there is no signal input.1) Press as to select [BACK COLOR].2) Press qw to switch the item.
|
