Panasonic PT-FZ570 Operating Instructions Manual

Also see for PT-FW530: Operating instructions (functional manual)Operating instructions

Contents

Panasonic PT-FZ570 Operating Instructions Manual Manual pdf 65 page image

Chapter 4 Settings — [PICTURE] menuENGLISH - 65Attentionf When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].[TV-SYSTEM](Only when the

*1 terminal is selected)The projector will automatically detect the input signal, but you can set the color system manually when anunstable signal is input. Set the color system to match the input signal.*1 When [COMPUTER1 INPUT SETTING] is set to [Y/C] (Æ page 77)1) Press as to select [TV-SYSTEM].2) Press qw or the button.f The [TV-SYSTEM] individual adjustment screen is displayed.3) Press qw to select the color system.f The items will switch each time you press the button.f Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].f Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M],[PAL-N], [SECAM], or [PAL60].)[RGB/YPB PR ]/[RGB/YC B C R ]Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB], [YCBCR]or [YPBPR] in accordance with the input signal.1) Press as to select [RGB/YP B PR ] or [RGB/YCB C R ].2) Press qw or the button.f The [RGB/YPBPR] or [RGB/YCBC R] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] The sync signal automatically selects the signal [RGB]/[YPB PR]/[YCB C R].[RGB] Select it for RGB signal input.[YP B PR ] Select it for YPBPR signal input.[YCB C R ] Select it for YCBC R signal input.When the /*1 terminal is selectedf For 525(480)/60i, 625(576)/50i, 525(480)/60p and 625(576)/50p inputSelect [AUTO], [RGB] or [YCBC R].f For other movie-based signal inputSelect [AUTO], [RGB] or [YPBPR].*1 When [COMPUTER2 SELECT] is set to [COMPUTER2 IN].When the // terminal is selectedf For 525(480)/60i, 625(576)/50i, 525(480)/60p and 625(576)/50p inputSelect [AUTO], [RGB] or [YCBC R].f For other movie-based signal inputSelect [AUTO], [RGB] or [YPBPR].Notef Refer to “List of compatible signals” (Æ page 149) for the types of video signals that can be used with the projector.f The signal selection may not function properly depending on connected devices.