Using Set-Up Mode5-37Set-Up Mode Quick ReferenceThe following flowchart shows how the Set-Up mode is organized.NOTE: Asterisks (*) indicate factory settings. SETUP MODEMACRO1 MACRO2DEC PPL2IBM PPX24EPSON ESCPAUTOPORT DEPND*PROTOCOL: HORZ PITCH: 10 CPI*12 CPI13.2 CPI15 CPI16.5 CPI17 CPI18 CPI20 CPIVERT PITCH: 2 LPI3 LPI4 LPI6 LPI*8 LPI12 LPI1 LPCM2 LPCM4 LPCMTOP MRGN: 1 LINES*2 LINES3 LINES•••256 LINESLEFT MARGN: 1 COL*2 COL3 COL4 COL•••255 COL256 COLFORM LENGH: 3 INCHES3.5 INCHES4 INCHES5.5 INCHES6 INCHES7 INCHES8 INCHES8.5 INCHES11 INCHES*11 2/3INCH12 INCHES14 INCHES15 INCHES1 LINES•••256 LINESDEC PRT ID: PPL2*LA50 IDLA120 IDLA210 IDAUTO WRAP: TRUNCATEWRAP*EOT DISCON: NO DISCON*DISCONNECTINIT REPRT:NO*YESAUTO ANSBK: NO*YESBOTTOM MRG: 1 LINES*2 LINES3 LINES•••256 LINESANSWER ENQ:NO*YESSTLFEDCEDSTLFEDCEDSTLFEDCEDSTLFEDCEDSTLFEDCEDSTLFEDCEDDEC PPL2*IBM PPX24EPSON ESCPPRTCL SERL:Valid when PORT DEPND isselected for PROTOCOL.DEC PPL2IBM PPX24*EPSON ESCP**PRTCL PARL:Valid when PORT DEPND isselected for PROTOCOL.** Default for Macro 2FONT: DRAFT*HSDRAFTHI-IMPACTPICACOURIERPRESTIGECOMPRESSEDBOLDFACETIMELESSNIMBUS-SANOCR AOCR BTOP OF FRM: 0 /60 IN*1 /60 IN2 /60 IN•••99/60 INPRINT DIR: UNIDIRBIDIRSOFT CNTRL*PAPER SRC: TRACTOR*MANUALRESVD 1RESVD 2LINE MODE: LF=LFCR=CR*LF=LF+CRCR=LF+CRLFCR=LF+CRFORM WIDTH:Appears in LA30W only.8 IN13.2 IN13.6 IN*
