Paper Handling3-135. Position the right tractor (as seen from the rear of the printer). Push the rightlocking lever down to secure the tractor. Center the middle forms support.Positioning the tractorsAdjusting the left marginBelow the right tractor, as seen from the back, there is a tractor guide, short inch-based ruler graduated in 10 columns per inch. Use the ruler to help position the trac-tor. When the paper edge is positioned to the left most line, the left margin is approx-imately 12 mm (0.5 inch) including perforation area.Ajusting the left margin6. Fit the paper feed holes onto the left and right tractor pins. Adjust the left tractor(as seen from the rear of the printer) to the width of the form. Close the paperholders.7. Pull the left tractor (as seen from the rear) to stretch the paper taut. Push the leftlocking lever down to secure the tractor in place.Cut sheet standLocking levers Paper select leverContinuousforms sideFormstractorsTractor guideTractor paper holdersTractor paper holders
