Paper Handling3-4The following table summarizes the use of levers and buttons in paper handling.More detailed information is provided later in this chapter.CAUTION: To load or feed paper, the printer must be:– In the Ready state but not receiving or printing data– In the Pause stateLevers and Buttons Used for Paper HandlingLever/Button Purpose ActionFF/LOAD Form feedLoad paperPress FF/Load to execute a formfeed. Continuous forms are fed for-ward by one page. Single sheets areejected.Press FF/Load to feed paper to thetop of form position.LF Line feed Press LF to feed paper forward byone line.Park Unload forms Press Park to retract continuousforms to the “park position.”LF + FF/LOAD Enter Top-of-Form (TOF)Adjustment modePress LF and FF/LOAD buttons atthe same time to enter TOF Adjust-ment mode where the paper loadingposition can be adjusted.Ç Increase TOF value by1/60 inchPress the Ç button to feed paper for-ward by 1/60 inch in TOF Adjustmentmode.È Decrease TOF value by1/60 inchPress the È button to feed paperbackward by1/60 inch in TOF Adjustment mode.Exit/Save Save TOF value Press Exit/Save to permanently storethe TOF position adjusted by the Çbutton and the È button in TOFAdjustment mode.Top Clear TOF adjustment Press the Top buttons at the sametime to clear the adjusted value andreturn to the initial state.
