Paper Handling3-16Unloading Continuous FormsTo unload continuous forms:1. Make sure that the paper select lever is set to the rear position.2. Press the Park button. The continuous forms paper is retracted to the park posi-tion. If the paper cannot be retracted in one operation, continue to press thePark button until the paper is parked.NOTE: The printer can retract continuous forms paper a maximum of 55.8 cm (22inches) per operation.3. To remove the paper, raise the tractor paper holders and lift out the paper.Installing the Tractor UnitInstall the tractor unit by following the procedure below if it happens to be disen-gaged from the studs.1. Turn off the printer.2. Remove the cut sheet stand and open the acoustic cover.3. Hook the notch of the tractor unit against stud 1, and then rotate the unit down-ward so as to set the other notch onto stud 2.Tractor unit installationStud 1Stud 2Stud 1Stud 2Acoustic cover
