Using Set-Up Mode5-12Printing the Printer ConfigurationThe PRINT function prints a list of all the printer’s currently selected values. Thisfunction is useful for checking the printer settings when you first enter the Set-Upmode or just before you exit. To print a list of values, first load continuous formspaper, and then enter the Set-Up mode to select the PRINT function. The printerstarts to print a list of the currently selected values. The pre-selected factory settingsare shown on the next page.When the printer finishes printing the list of values, it reprints the menu.CAUTION:To remove the printout, turn the platen knob until the paper can be tornoff at the perforation. In the Set-Up mode, you cannot use the printer tear-off feature (Pause button).Select another function or exit the Set-Up mode, saving any changes you made. Fordetails about other functions, see the other sections in this chapter. To exit the Set-Up mode and save your changes, make sure that the red cursor is positioned beneathSAVE&EXIT, then press the È button or the Ç button.
