Using Set-Up Mode5-33Save Settings and Exit Set-up modeThis section describes how to exit the Set-Up mode while saving any changes youhave made.To exit the Set-Up mode with the settings saved, first select the SAVE&EXIT func-tion and then press the È button or the Ç button.Any settings changed while in the Set-Up mode are saved as the new power-on de-faults for the printer. The new defaults remain active until you change them again.CAUTION:To temporarily use your changes, press the Set-Up/Quit button. Thesechanges are lost at the next power-off.Recall Factory SettingsFactory settings are those settings preselected at the factory. To recall (reset) the fac-tory Recalling Factory SettingsFactory settings are those settings preselected at the factory. To recall (reset) the fac-tory settings, select the RCALL-FACT function and press the È button or the Çbutton.Options under the MACRO, INSTALL, and ADJUST functions are all initialized tothe factory settings.
