Setting up the printer2-20Control Panel Operations—: This operation has no connection with this condition.N/A: The condition does not apply because this operation is executed before powerin-gon.OperationRequired Conditions 1Required ActionReady Printing 2 FaultLoad continuous formspaper— Not printing On Press FF/Load.Load single sheet paper — Not printing On Press FF/Load if singlesheetload is switched fromAUTOto MANUAL in Set-Upmode.Feed paper a page — Not printing Off Press FF/Load.Feed paper a line — Not printing Off Press LF.Advance perforation totear bar— Not printing Off Press Pause if the TEARop-tion is switched fromAUTOto MANUAL in Set-Upmode,or press FF/Load.Advance paper forviewing— Not printing Off Press Pause if the TEARop-tion is switched fromAUTOto MANUAL in Set-Upmode.Return paper to previousposition— Not printing Off Press Pause if the TEARop-tion is switched fromAUTOto MANUAL in Set-Upmode,or press FF/Load.Eject single-sheet paper — Not printing Off Press FF/Load or Park orturnthe printer off and onagain.Unload continuous-forms 3— Not printing Off Press Park.Pause printing On Printing Off Press Pause.Resume printing Blinking Not printing Off Press Pause.Resume printing after afaultOff Not printing On Clear error and pressPause.
