C-22Command SetsFunction CommandIBM Proprinter X24E and XL24E Quick Reference GuideThis section describes the printer commands for the IBM Proprinter X24E and XL24Eprotocol. When there is a difference, it is identified by LA48N (X24E) and LA48W(XL24E). Asterisks in the “Function” column indicate extended commands that are notsupported by the original printer.Function CommandPrint Mode ControlDouble-strike (bold) printing on ESC GDouble-strike (bold) printing off ESC HEmphasized (shaded) printing on ESC EEmphasized (shaded) printing off ESC FSingle-line double-width characters on SO or ESC SOSingle-line double-width characters off DC4Double-width characters on/off ESC W (n)(on: n = 1, off: n = 0)Double-height/double-width characters ESC [ @ (n1 ) (n2) (m1) ... (m4 )n1 = 4, n2 = 0, m1 = 0, m2 = 0m3 controls character height and line spacing:m 3 Height Spacing0 Unchanged Unchanged1 Normal Unchanged2 Double Unchanged16 Unchanged Single17 Normal Single18 Double Single32 Unchanged Double33 Normal Double34 Double Doublem4 controls character width:m 4 Width0 Unchanged1 Normal2 DoubleCondensed characters on SI or ESC SICondensed and elite characters off DC2Subscript or superscript printing on ESC S (n)(subscript: n = 1, superscript: n = 0)Subscript and superscript printing off ESC TUnderline on/off (on: n = 1, off: n = 0) ESC - (n)Overline on/off (on: n = 1, off: n = 0) ESC (n)
