Using Set-Up Mode5-4Overview of the Set-Up ModeWhen you enter the Set-Up mode, the following menu is printed:The following table summarizes the purpose of each function.Set-Up Mode FunctionsTo select a function from the menu:1. Repeatedly press the Æ button or the button to position the red cursor on theplastic print guide under the function you require.2. Press the È button or the Ç button to select the function. If the function hasoptions and values, the printer prints the first option and its values.The MACRO 1, MACRO 2, INSTALL, ADJUST, TESTS, and MENU-ACCESS functions contain options that have selectable values. The other func-tions have neither options nor values.Function PurposeMACRO 1 and MACRO 2 Assigns print features to MACRO 1 and MACRO 2PRINT Prints the Printer ConfigurationINSTALL Changes the Set-Up menu language, computer inter-face, and paper feed control optionsADJUST Changes the top-of-form fine adjustment optionsTESTS Runs the printing test and hex dumpsRCALL-FACT Resets factory settings in MACRO 1, MACRO 2,INSTALL and ADJUSTMENU-ACCESS Restricts access to Set-Up functions from the controlpanelSAVE&EXIT Exits the Set-Up mode and saves any changes madein the Set-Up modeMACRO 1 MACRO 2 PRINT INSTALL ADJUST TESTS RCALL-FACT MENU-ACCESS SAVE&EXIT
