Setting up the printer2-221 In Normal mode operation, all buttons except Pause are inactive in the Busy state in which the printerisreceiving or printing data.2 Not printing includes the following situations: the printer is ready and awaiting data, or the Pause buttonispressed and the printer is awaiting data, or the Pause button is pressed during printing.3 This operation is available in the rear-feeding push-tractor mode.4 Switching is not done if the printer is holding printing data.Printer Acoustical FeedbacksExcept for paper handling and when the factory setting for beep is not changed, theprinter beeps in the following ways when you press a control panel button, as fol-lows.z A short beep indicates that the printer accepts your pressing or specification.z A longer beep indicates that your specification is invalid.z In a certain mode, a middle long beep indicates that the specified mode becomesactiveand a short beep indicates the end of the mode.z When the Fault indicator lights, the printer also makes a longer beep.Select a Set-UpValue and move cur-sor to SAVE&EXITOff Not printing Off Press Exit/Save.Quit Set-Up modewithout saving valuesOff Not printing Off Press Set-Up/Quit.Clear software-detectederrors— — Blink-ingPress Pause.Initialize the printer — — — Turn power off and onagain.OperationRequired Conditions 1Required ActionReady Printing 2 Fault
