Using Set-Up Mode5-30Adjusting Top-of-Form OriginPrint positions often change gradually when you use the printer over long periods oftime. The ADJUST function allows you to adjust these positions by fine-tuning theTop-of-Form origin.The following table describes the ADJUST options and values. Options are listed inthe order they are printed.Adjust Options and ValuesOverprinted values are the factory settings.Adjust Options Values Description(Fanfold Adjustment)##/60 INAdjust the Top-of-Form origin for continuousforms in increments of 1/60 inch (0.42 mm)from the physical top of the page.-10 to 10 (0)Number of 1/60 inches(Manual Adjustment)##/60 INAdjust the Top-of-Form origin for single sheetsin increments of 1/60 inch (0.42 mm) from thephysical top of the page.-10 to 10 (0)Number of 1/60 inches Reserved Reserved -21/360-14/360-7/3600/3607/36014/36021/360GRAPHICAccumlative LF adjustment for Cut Sheet
