Using Set-Up Mode5-25Changing Install OptionsThe INSTALL function defines the printer’s installation conditions. You can selecta language from five that are used to print menu functions and options during the Set-Up operation . You can adjust the start timing of auto loading or auto tear-off feeding.You can also change the operation of the error beep or allocation of the input buffer.If you are using the RS232 serial interface, you must set the serial interface optionsproperly for the printer to function correctly with your system hardware.The following table describes the INSTALL options and values. Options are listed inthe order in which they are printed. The procedure for changing the INSTALL op-tions is detailed in the early sections of this chapter.(Epson Defaults)The following are the Set-Up options forthe Epson ESC/P2 protocol only.(Epson Character-Set) USAFRANCEGERMANYUKDENMARK1SWEDENITALYSPAIN 1JAPANNORWAYDENMARK2SPAIN 2LATIN AMKOREALEGALSelect a national character set.American EnglishFrenchGermanBritish EnglishDanish 1SwedishItalianSpanish 1JapaneseNorwegianDanish 2Spanish 2Latin AmericanKoreaLegalMacro1/Macro 2 Values Description
