Using Set-Up Mode5-26Install Options and ValuesOverprinted values are the factory settings.Install Options Values DescriptionENGLISHDEUTSCHESPANOLFRANCAISITALIANOSpecify a language to be used to print the Set-Up menu functions and options.EnglishGermanSpanishFrenchItalianAUTO 1 SECAUTO 2 SECAUTO 3 SECAUTO 4 SECAUTO 5 SECMANUALNO TEARSpecify the (auto) start timing of tear offfeeding.1 second after data stops from the computer2 second after data stops from the computer3 second after data stops from the computer4 second after data stops from the computer5 second after data stops from the computerFeed the paper for tear-off when the Pausebutton is pressed.Tear off feeding is inhibited under any condi-tions. Specify this setting for labels that tend topeel off during backward feeding.(Single Sheet-Load) AUTO 1 SECAUTO 2 SECAUTO 3 SECAUTO 4 SECAUTO 5 SECMANUALSpecify the (auto) start timing of single sheetloading.1 second after a single sheet is set on theplaten2 second after a single sheet is set on theplaten3 second after a single sheet is set on theplaten4 second after a single sheet is set on theplaten5 second after a single sheet is set on theplatenLoad a single sheet when the FF/Load buttonis pressed.
