5.5 Stapling100Making Copies AddedFeaturesBasicFeaturesImageQuality Stored JobTemplatesOutputFormat● When a message prompting you to replace staple cartridge appears, the machine will not start even if you press the Startbutton. To proceed, replenish the staples first. For details, refer to “10.5 Replacing Staple Cartridge”.● When the positions for punching and stapling are in conflict (e.g. stapling on the top left and punching on the right), the machinewill not start even if you press the Start button. Check the positions again.● When tray 5 (bypass) is selected, stapling can be carried out only if Plain/Heavywt 1 is selected for Paper Supply.● For non-standard paper size, only sizes within 210 – 297 mm (Y direction) and 182 – 432 mm (X direction) can be used.● If you attempt to staple copies exceeding the maximum number of sheets, stapling will be cancelled.● The maximum number of sheets that can be stapled is 50 using the staple cartridge for 50 sheets (optional) and 100 using thestaple cartridge for 100 sheets.● You can replace the installed staple cartridge with the optional staple cartridge for 50 sheets. Contact your Customer SupportCenter for details.● When option tray 7 is selected, staple positions are limited as follows. This limitation can be changed by means of a customerengineer setting. Contact our Customer Support Center for details.• When Head to Top is selected for document orientation: The left side (Top Left ×1 or Left ×2)• When Head to Left is selected for document orientation: The top side (Top Left ×1 or Top ×2)● The Transparency option cannot be selected together with Repeat Image.● If you are stapling Z-folded copies, the number of sheets that can be stapled is reduced.Procedure1 Load the documents.2 From Output, select how the copies are to be sorted.3 Select Collated/Stapled/Punched.“3.2 Loading Documents”● When loading mixed-sizedocuments, align the Y-directionedges of the documents.
