1.3 Using the Touch Panel Display14Knowing Your Copier1.3.2 Touch Panel DisplayThe touch panel display is located at the left side of the control panel. It displays the messages andfeature buttons required for performing a copy job. By touching the display with your fingers, you canmake settings or select required screens. In the following section, the main screens will be used toexplain the screen contents, as well as how to select the feature buttons. The touch panel display willbe referred to as the display from now on. And the contents shown on the display will be referred toas the screen.● Switch Mode buttonsYou can use these buttons to switch between the basic copying and server operation.● Select Copy to make copies.● Select Copy and Save to make copies and to save the scanned document data to the server.● Select Save to File to save scanned document data to the server.● Select Build Job to define build job settings.● Select Edit/Print Files to change names of copy files and scan files saved to the server, merge copy files,duplicate/move copy files, change settings and print copy files.● Select Scan to scan documents such as photographs as image data. Scanned document data is stored ina mailbox as scan files. Scan files stored in mailboxes can be downloaded onto client computers.“Chapter 6 Server”“Chapter 7 Scanning”Switch mode buttonsMemoryPaper Remaining
